top of page

Wash Mitt -  All Chenille

What is it for?

7"x9" Chenille Wash Mitt is the ultimate choice for lifts and traps dirt and grime without scratching or swirling paint, glass, metal, or optical plastic.

 

Why is it special?

Immense absorbent capacity carrying 7-time of water, soap and subs of its own weight that enable your wash thoroughly lubricant and free from scratching
High quality cuff elastics is just comfortable to wear on meanwhile avoid drop after dunking in water
Super soft, totally lint free

 

How to Use?

Use two buckets whenever washing your car - fill one bucket with 5 gallons of water and add your favorite car wash shampoo as dilution ratio suggested, and the other bucket with plain water. Rinse your car, then wash in straight lines with the soapy wash mitt. After cleaning half or a panel, dip the mitt into the bucket of plain water to loosen the embedded dirt and grime, then wring it out on the ground to purge the dirt from the mitt. Return to the soap bucket and continue to wash the whole car.
Or use to buff after waxing when the mitt is dry.

 

Maintenance

Just throw it in a wash machine, you are good to go.

Wash Mitt -  Clay and Microfiber (Grey & Yellow)

What is it for?

Remove overspray, industrial fallout, brake dust, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings or plastic. 

 

Why is it special?

Raw material of polymerized rubber imported from Germany and patented tectorial technology transferred from Japan enable quality of Globalwipe's Clay Mitt to compete any similar products

Nest design groove traps scrubbing-down-dirt free from scratching paint

Luxury towel side made of best quality microfiber fabric safe for buff and water absorbing
Integrate compound of clay and microfiber make detailing easier than ever
Clay Mitt is new generation invention replacing clay bar for its faster, easier and safer features. Its service life is 5 times of a clay bar. 
Not anyone can use traditional clay bar properly - choosing grinder level for varied surface condition, control skill,  storage, fold again and again... accident dropping onto the ground may terminate life of a clay bar. On opposite, even a detailing layman can learn to use this clay glove in few minutes. One grade for all conditions. In case dropping onto the ground, just clean it with warm water or lubricants.

 

How to Use?

Wash vehicle well with water or a foam bath. Be sure removing tar and grease before application. Start by getting the clay side moist and spray your favorite lubricant or water and rub. Glide the clay side of the Clay Mitt back and forth on the surface being sure proper pressure is given to remove dirt. Continue rubbing gently until glides freely.
After clay works done in one area, immediately use the microfiber side to clean.
Checking clay side frequently to ensure keeping clean, otherwise mist it with some lubricant or water and clean with a microfiber towel.

 

Maintenance

Never use Clay Block or Clay Bar on paint surface below 55 or over 144 Fahrenheit degree! After use, clean with car shampoo or clay lubricant. Clay polymer is NOT solvent resistant. Do not use harsh chemicals.

Wash Mitt -  Crane Velours (White & Orange)

What is it for?

Crane Velours Wash Mitt is the ultimate choice for show car perfect finishes. Its coat safe microfiber lifts and traps dirt and grime without scratching or swirling paint, glass, metal, or optical plastic.

 

Why is it special?

Crane Velours Wash Mitt is made of higher quality microfiber yarn than for normal microfiber towel, and shiny velours mixed among weaving make it softer and luxury
Immense absorbent capacity carrying 7-time of water, soap and subs of its own weight that enable your wash thoroughly lubricant and free from scratching
High quality cuff elastics is just comfortable to wear on meanwhile avoid drop after dunking in water
Super soft, totally lint free

 

How to Use?

Use two buckets whenever washing your car - fill one bucket with 5 gallons of water and add your favorite car wash shampoo as dilution ratio suggested, and the other bucket with plain water. Rinse your car, then wash in straight lines with the soapy wash mitt. After cleaning half or a panel, dip the mitt into the bucket of plain water to loosen the embedded dirt and grime, then wring it out on the ground to purge the dirt from the mitt. Return to the soap bucket and continue to wash the whole car.
Or use to buff after waxing when the mitt is dry.

 

Maintenance

Just throw it in a wash machine, you are good to go.

Wash Mitt -  Lambswool (Genuine & Synthetic)

What is it for?

Globalwipe's sheepskin lambswool Wash Mitt is the ultimate choice for show car perfect finishes. Its coat safe lambswool lifts and traps dirt and grime without scratching or swirling paint, glass, metal, or optical plastic.

 

Why is it special?

Only 7 Wash Mitts outcomes from a whole sheepskin without using any splicing raw material.
Immense holding capacity of water, soap and subs enable your wash thoroughly lubricant and free from scratching.
Long and thick lambswool traps dirt and debris gently
Versatile uses to cleaning interior and exterior under both wet or dry conditions.
High quality cuff elastics is just comfortable to wear on meanwhile avoid drop after dunking in water.
Super soft, totally lint free, and clear coat safe.

 

How to Use?

Rinse your auto with clean water. Dunk Lambswool Wash Mitt into washing soaps entirely then start to wipe on exterior panels. Or apply it directly after foam bath. Use it to dust exterior or interior panels under dry conditions.

 

Maintenance

Shedding hair slightly is normal because it is genuine wool. Just rinse in clean plain water to remove dirt easily. Dry it naturally or with low heat.

Black Nitrile Glove

100 pieces/ box, 5.5 mil thickness, S, M, L, XL

 

What is it for?

Globalwipe's Black Nitrile Glove is widely used for auto detailing, house cleaning, law enforcement, tattooist, gardening, machine operator, food and beverage industry.

 

Why is it special?

Black Nitrile for extreme comfort, strength, tactile sensitivity and protection perfect for professional detailer.
3 times strength of puncture and chemical resistance than latex or vinyl glove.
Micro-textured for maximizing gripping strength for wet or dry applications.
Smooth interior finish for easy donning.

 

Maintenance

Wear on hand to wash under running water if you the glove is still reusable. Otherwise just throw it away when it is too dirty.

bottom of page